Technical Information

COMPOSITE (WAN) LINKS

Primary (port A1) Female DB-25, strap-selectable as RS232, X.21, or V.35; configured as DCE, serial synchronous, internal/external clock

Secondary Backup Link (port A2) Female DB-25 RS232, configured as DCE, serial synchronous, internal/external clock

MicroBand ATM Leased Line ACCESS

1 link supporting access rates from 2400 bps to 128 Kbps

FRAME RELAY ACCESS (Port A1and A2)

2 Physical Links configurable up to 48 PVCs (application dependent)
Access Rates: 56 Kbps to 1.536 Mbps (T1) Maximum Sustained Throughput: 384 Kbps

VOICE/FAX CHANNELS

Base Unit with 2 built-in Voice/Fax Channels Supports CEPT L1 (AC15) and RON/TRON

Interfaces supported on base unit:
E&M 2 & 4 wire, I, II, IV, V, FXS, FXO

Voice/fax expansion models supported:
TUVM, VM and UVM

Maximum voice/fax channels supported: 4

DATA CHANNELS

Female DB-25, full duplex, configured as DCE

Maximum async data channels: 26
Maximum sync data channels: 2 (ports A2 & A3)

Data expansion models supported:
5000E/6, 5000E/12, 5000E/12LD

Data Rates:
Sync to 64K, Async to 38.4K (application dependent)

Flow Control:
EIA (RTS/CTS, DTR/DSR); XON/XOFF; HP ENQ/ACK; Tandem; Wang, and Data General

Protocols Supported:
Most standard async and sync protocols

INTEGRATION ROUTER MODULE (IRM) OPTION

Ethernet IP/IPX routing and tranparent bridging

CODE DOWNLOAD

Single-Bank Flash memory supplied with base system; Dual-Bank Flash available as an upgrade with realtime clock (5003M/RTC, SIMM module)

COMPATIBLE MICOM PRODUCTS

All Micom Marathon products; link-compatible with Micom NetRunner® and STADIA™ products

DIAGNOSTICS

Startup, local/remote channel loopbacks, local/remote composite loopbacks

MANAGEMENT OPTIONS

Micom's PC-based NETMan network managment system; a local/remote terminal; Using IRM option and an SNMP-based console (public domain, MIB II, monitor mode)

PHYSICAL DIMENSIONS

Width 17.4 inches (44.2 cm)
Height 4.4 inches (11.2 cm)
Depth 11.8 inches (30 cm)
Weight 13 lbs (5.9 kg)

POWER REQUIREMENTS

100-240 Vac -5%, +10%, 1-2 amps; 47 to 63 Hz, 88 watts maximum

OPERATING ENVIRONMENT

Temperature: 32° to 122° F (0 to 50° C) operating -40° to +158° F (-40 to +70° C) storage

Humidity

10 to 90% relative humidity (noncondensing) operating 0 to 95% relative humidity (noncondensing) storage

AGENCY COMPLIANCE

FCC Part 15 Level A, FCC Part 68, C.R.C., c. 1374
EN55022 (CISPR 22 Level B)
EN50082-1:1992 (contact Micom for IEC801/EN55024 compliances)
UL 1950:1993
CSA Standard C22.2 No. 950:1993
IEC 950:1991+A1:1992
TUV: EN60950:1992, EN41003:1993, BABT/BS-340
EU Declarations of Conformity

The Marathon 3K handles virtually all legacy data protocols, including DEC VT100, H-P ENQ/ACK and SNA/SDLC. For LAN traffic, an optional Integration Router Module provides robust LAN routing capabilities. High-speed legacy data and LAN compression provide optimal bandwidth efficiency.